Switchable Phantom Power in Groups of 8 (1-8, 9-16, 17-24)
Mono
input channels feature insert patch points that can be used to insert
external signal-processing devices into the channel's signal path.
Insert I/O points are also provided on the stereo bus (L and R) and on
the four group buses.
Mid-sweep 3-band Mono Channel EQ, 4-band Stereo Channel EQ
3-band
EQ with a 10 kHz shelving HIGH control, a 250 Hz ~ 5 kHz sweepable MID
control, and a 100 Hz shelving LOW control. The microphone inputs also
have switchable 80 Hz high-pass filters for low-frequency noise
reduction.
The stereo channels feature 4-band EQ with 10 kHz HIGH, 3 kHz HI MID, 800 Hz LO MID, and 100 HZ LOW controls.
In
addition to the main stereo bus that feeds the console's main outputs,
the MG32/14FX features four group buses for convenient
sub-mix grouping, six auxiliary buses for monitoring and external effect
send, and send buses for the two internal effect processors.
All input channels have a total of six
auxiliary sends: AUX send 1 through 4 can be switched for pre- or
post-fader operation, while AUX sends 5 and 6 are post-fader. Two
EFFECT sends are provided in addition to the six AUX sends. That's more
than sufficient send capability to handle monitoring and effects for all
but the most complex applications. Two stereo AUX returns are provided
in addition to the internal effect returns, providing an extra margin of
return versatility for wet monitoring, for example.
The mixer's main
stereo program signal is simultaneously delivered to the main stereo
outputs (XLR jacks), the sub-stereo outputs (phone jacks), the REC OUT
connectors (RCA pin jacks), the mono out (XLR jack), and the headphones
output (stereo phone jack). Independent phone-jack outputs are also
provided for group buses 1 through 4.
A low-pass filter with a roll-off
frequency that can be varied from 80 to 120Hz is provided on the mono
output for convenient connection and optimum matching with a subwoofer.
Four
high-visibility 12-segment meters are switchable to allow precise
visual monitoring of levels on the main stereo bus, the four group
buses, the stereo 2-track input, the PFL (Pre-Fader Listen) bus, or the
AFL (After-Fader Listen) bus.
Two Yamaha digital signal processors
that provide a useful selection of 16 advanced digital effects. Effect
programs include reverb, delay, pitch change chorus, phaser, voice
doubler, and distortion. The effects include editable parameters so they
can be customized as required, and processor "B" even has a TAP switch
for real-time tap-tempo entry. With these top-performance effect
processors built in, you wont have to transport and set up racks of
external effects to create your sound.
The channel ON switches, PFL
(Pre-Fader Listen) switches and phantom power switches are original
Yamaha illuminated types, so it's easy to visually check vital console
settings.
A talkback microphone input is provided for easy, efficient
communication between the sound engineer and musicians and staff in
live-sound applications, during setup, rehearsal, and the actual
performance.